Check the door gaps for any foreign objects between door and frame.Lock chimes to indicate code acceptance, but door will not open. Lock is on for a while then shows no reaction. Apply a 9V battery to terminals below the keypad for backup power option.Check to see if keypad cable is fully connected and is not pinched.Check batteries are in good condition replace batteries* if batteries are dead.Check batteries are installed and oriented correctly (polarity) in battery case.If keypad numbers are visible, check to see if they respond when pressed.Yale keypad becomes active when the Yale logo is pressed.Lock does not respond – door is open and accessible. **Network Module Setting function appears only with Yale Smart module installed. *The Master Entry Code must be created prior to any other programming of the lock. Enter digit corresponding to the function to be performed followed by the icon.Press each number to hear available settings and then press the settings icon to enter.” Lock Response: “Welcome to the Settings Menu. Enter Master Entry Code* followed by icon.Customizing Lock Through Settings Menu *Master Entry Code Required When attempting to enter a code while the lock is in All Code Lockout mode, the RED locked padlock will appear on the screen.ĥ Times After five (5) unsuccessful attempts at entering a valid entry code, the lock will shut down and not allow operation for sixty (60) seconds.Ħ0 Seconds The Lock will shutdown (flashing RED) for sixty (60) seconds and not allow operation after the wrong code entry limit (5 attempts) has been met. When enabled, it restricts all user (except Master) Entry Code access. Language English Choosing English (1), Spanish (2) or French (3) becomes the (default) setting for the lock’s voice prompts.ĭisabled This feature is enabled by the Master Entry Code. Enable Privacy mode by pressing the privacy button for 4 seconds to put the lock in do- not-disturb mode (all pin codes are disabled).Įnabled (Low) The volume setting for entry code verification is set to Low (2) by default otherwise it can be set to High (1) or Silent (3) for quiet areas. When One-Touch Re-lock is not in use (disabled), any valid PIN code will re-lock the lock.ĭisabled Privacy mode is disabled by default. Shows active status (Locked) of lock and can be enabled or disabled in the Advanced Lock Settings (Main Menu selection #3).Įnabled When the latch is retracted, activating the keypad will extend the latch (during Auto Re-lock duration or when Auto Re-lock is disabled). In the ON mode, the lock will automatically re-lock after thirty (30) seconds.ĭisabled (Off) Located on the inside lock. This feature is optional, and can be turned off. The Master code will also operate (unlock/lock) the lock.ĭisabled After a successful code entry or manual unlock with the key, the lock will automatically re-lock after each unlock in an effort to keep your home secure. It must be created prior to programming the lock. Setting Definitions Settings Default Setting DefinitionĬreation required* The Master Entry Code is used for programming and for feature settings. To delete one entry code, (Does not delete Master Entry Code): *Max user codes = 250 with Smart Module 25 withoutĭeleting one entry code: To delete all entry codes The master entry code is used to change the lock settingsĪ security best practice is to set your master code with 6 or more digits and create a separate code that is used daily to lock and unlock the door Installing Optional Yale Smart Moduleįor more information about Yale Smart modules and smart home features visit: Installing Batteries and CoverĬongratulations, you’ve installed the Yale® Assure Lock® SL Key Free Touchscreen Deadbolt (YRD256)! Using Your Lock If thumbturn operation fails, check the installation beginning with Step 3.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |